Blog > Blogs

Activated Carbon in Sewage Treatment Plants: Odour Control and Tertiary Filtration After Biological Treatment

image
AI Icon Summarize this Article with AI

Key Highlights

  • Sewage treatment plants produce odorous compounds including H2S, mercaptans and ammonia that activated carbon captures in fixed-bed scrubbers before off-gas is vented.
  • Biological treatment stages alone do not reliably remove micropollutants, colour, surfactants or trace pharmaceuticals from sewage effluent.
  • Granular activated carbon tertiary filters polish biologically treated effluent to meet stringent discharge or reuse standards including BOD below 10 mg/L.
  • Powdered activated carbon can be dosed directly into aeration tanks or clarifiers for shock load treatment without additional infrastructure.
  • Micropollutant removal with activated carbon covers pharmaceuticals, personal care products and endocrine-disrupting compounds at removal rates above 70 percent.
  • Western Carbon supplies GAC and PAC for STP odour control and tertiary filtration with technical support across India and international markets.

Sewage treatment plants manage one of the most complex wastewater streams encountered in municipal infrastructure. Raw sewage carries dissolved organics, pathogens, suspended solids and a range of odour-generating compounds that challenge treatment systems at every stage. Biological processes handle the bulk organic load efficiently, but they leave behind contaminants that resist biodegradation, including trace pharmaceuticals, synthetic fragrances, colour compounds and persistent organic matter. Granular activated carbon and powdered activated carbon address these residual challenges, completing the treatment sequence and enabling STPs to meet tightening regulatory discharge standards.

Beyond liquid-phase treatment, STPs generate significant volumes of foul-smelling off-gas from inlet works, primary sedimentation, sludge handling and biogas systems. Activated carbon beds placed in ventilation ducts or biofilter bypass streams capture H2S, mercaptans and volatile organic compounds before they reach the site boundary. This dual role in liquid and gas-phase treatment makes activated carbon indispensable in modern sewage treatment plant design. Western Carbon and Chemicals supplies both GAC and PAC grades engineered for STP applications, with technical support from selection through commissioning.

1. Sewage Treatment Plant Process Overview: Primary to Tertiary

Understanding where activated carbon fits in an STP requires a clear picture of the full treatment sequence. Municipal sewage passes through several distinct stages before effluent can be safely discharged to surface water or reused for irrigation or industrial purposes.

Primary Treatment

Screening removes large solids including rags, plastics and grit. Primary sedimentation settles settleable suspended solids and skims floating grease, reducing total suspended solids by 50 to 70 percent and BOD by 25 to 35 percent. The settled sludge is thickened and sent for further processing. No dissolved organics are removed at this stage.

Secondary Treatment

Biological processes including activated sludge, sequencing batch reactors, moving bed biofilm reactors and trickling filters mineralise dissolved organics using microbial metabolism. Well-operated biological secondary treatment achieves BOD reduction of 85 to 95 percent and TSS removal above 90 percent. Ammonia is nitrified to nitrate, and in some configurations, denitrification reduces total nitrogen further.

Tertiary Treatment

Secondary clarifier effluent still contains residual BOD (10 to 30 mg/L), colour, non-biodegradable organics, trace pharmaceuticals and pathogens. Tertiary treatment using filtration, UV disinfection and activated carbon polishes effluent to levels suitable for discharge into sensitive waterbodies or reuse in agriculture and industry.

STP Stage Target Parameters Activated Carbon Role
Inlet works / primary Odour from raw sewage Off-gas scrubbing at inlet vents
Primary sedimentation H2S from anaerobic sludge Carbon beds on tank covers
Secondary biological Residual BOD, shock loads PAC dosing into aeration tank
Tertiary filtration Residual COD, colour, micropollutants GAC fixed-bed or pressure filter
Sludge handling H2S, mercaptans, VOCs Carbon scrubbers on sludge thickeners
Biogas handling H2S in biogas Carbon guard beds before CHP

2. Why Biological Treatment Alone Is Not Enough

Biological treatment is highly effective for biodegradable organic matter but inherently limited in several respects. The microorganisms in an activated sludge system metabolise compounds that serve as carbon or nitrogen sources, but they cannot efficiently degrade molecules that are toxic, recalcitrant or present at very low concentrations below kinetic thresholds.

!

Trace organic contaminants at concentrations below 1 microgram per litre often escape biological treatment entirely because microbial populations cannot sustain activity at such low substrate concentrations. Activated carbon removes these compounds by adsorption, independent of biological kinetics.

Key limitations of biological treatment in sewage systems include incomplete removal of pharmaceuticals such as diclofenac, carbamazepine and 17-alpha-ethinylestradiol; persistence of synthetic surfactants and fragrances; formation of disinfection by-products when chlorinated; residual colour from humic substances and industrial contributions; and ammonia breakthrough during cold weather when nitrifier activity drops. Activated carbon addresses each of these gaps without requiring modification of the biological stage.

3. Activated Carbon for Odour Control in STP Off-Gas

Odour complaints are among the most common regulatory and community issues faced by STP operators. Sources within an STP include the inlet screening chamber, grit channels, primary sedimentation tanks, return sludge pumping stations, sludge thickeners and dewatering buildings. Each generates a characteristic mixture of odorous compounds at varying concentrations.

Activated carbon is deployed in one of several configurations depending on the volume and concentration of odorous air to be treated. Packed-bed carbon adsorbers handle ducted airstreams from enclosed structures. Smaller units using acid-washed activated carbon or virgin granular carbon treat localised odour sources such as manhole vents or pump stations. Carbon biofilters combine biological odour oxidation with a final carbon polishing layer for large-volume low-concentration streams.

Key fact: A well-designed activated carbon odour scrubber maintains outlet H2S below 0.5 ppm, well below the odour detection threshold of approximately 0.0005 ppm and regulatory limits in most Indian state PCB guidelines.

The choice of carbon grade matters significantly in odour applications. Standard granular activated carbon adsorbs H2S and mercaptans effectively at low inlet concentrations, typically below 50 ppm. For higher concentrations or streams with significant ammonia content, impregnated carbon grades are more appropriate. Western Carbon’s Westdiox range covers acid gas and H2S applications with enhanced capacity.

4. H2S, Mercaptans and Ammonia Removal from STP Air Streams

The principal odour compounds generated in sewage treatment are hydrogen sulphide (H2S), methyl mercaptan (CH3SH), dimethyl sulphide, dimethyl disulphide and ammonia. H2S is produced wherever anaerobic conditions develop, including in primary sludge, in long sewer mains and in covered tank headspaces. Mercaptans are generated during protein degradation in sludge. Ammonia volatilises from ammonium-rich streams including digested sludge filtrate.

H2S Removal on Activated Carbon

H2S adsorption on activated carbon proceeds through physical adsorption and catalytic oxidation. In the presence of moisture and oxygen, activated carbon catalyses the oxidation of H2S to elemental sulphur, which deposits within the pores and blocks capacity over time. Periodic regeneration by water washing or thermal treatment restores capacity. Alkali-impregnated carbon grades convert H2S to sodium sulphide, achieving higher capacity per kilogram of carbon at the cost of non-regenerability.

Mercaptan Removal

Methyl and ethyl mercaptans are more strongly adsorbed than H2S on a mass basis due to their higher molecular weight and polarity. Standard GAC in 8×30 mesh performs well for mercaptan control. Extruded activated carbon pellets are used in some odour control systems where lower pressure drop is required across deep beds.

Ammonia in STP Off-Gas

Ammonia is a polar, water-soluble molecule that is poorly adsorbed on standard activated carbon. Acid-impregnated carbon (phosphoric acid or sulphuric acid) converts ammonia to ammonium salt, achieving effective capture. These impregnated grades are used specifically in sludge handling buildings and digested sludge storage where ammonia concentrations in off-gas can exceed 50 ppm. Standard carbon beds upstream and downstream of a wet acid scrubber provide polishing for multi-component odour streams.

Odour Compound Typical Inlet Concentration (ppm) Carbon Type Expected Removal
Hydrogen sulphide 5 to 500 Standard GAC or alkali-impregnated Greater than 99%
Methyl mercaptan 0.1 to 20 Standard or acid-washed GAC 95 to 99%
Dimethyl sulphide 0.1 to 10 Standard GAC 90 to 95%
Ammonia 5 to 100 Acid-impregnated carbon 80 to 95%
Volatile organic compounds 1 to 50 High-surface-area GAC 85 to 99%

5. Tertiary Filtration Using GAC in Sewage Treatment

After biological treatment and secondary clarification, the remaining liquid-phase polishing challenge is entrusted to granular activated carbon. GAC tertiary filters receive clarified secondary effluent and reduce residual BOD, COD, suspended solids, colour and micropollutants to discharge or reuse specifications.

The standard configuration is a downflow pressure vessel or open gravity filter containing a bed of GAC in the 8×30 or 12×40 mesh range. Empty bed contact time (EBCT) of 10 to 20 minutes provides sufficient residence time for adsorption of dissolved organics. Hydraulic loading rates of 5 to 15 metres per hour are typical. The granular activated carbon filter serves as the final polishing unit before UV disinfection or chlorination.

Activated Carbon for Your STP

Western Carbon supplies granular activated carbon for sewage treatment tertiary filtration and odour control applications. Tell us your STP capacity and contaminant targets.

Get STP Carbon Supply

In some installations, GAC replaces or supplements conventional sand filters in the tertiary stage, providing the dual benefit of physical filtration and adsorption in a single vessel. This reduces capital cost and footprint compared to sequential sand and carbon systems. For STPs discharging to sensitive receiving waters, a parallel powdered activated carbon treatment system can be used during peak pharmaceutical load periods, with GAC providing the baseline tertiary performance year-round.

6. Micropollutant Removal: Pharmaceuticals and Personal Care Products in STP

The presence of pharmaceuticals, personal care products and endocrine-disrupting compounds in STP effluent has become a major regulatory concern globally. Compounds including ibuprofen, diclofenac, 17-alpha-ethinylestradiol, bisphenol A, triclosan and synthetic musks are detected in treated sewage effluent at concentrations ranging from nanograms to micrograms per litre. Even at these trace levels, some compounds cause measurable effects on aquatic ecosystems.

Activated carbon is the most broadly effective technology available for micropollutant removal from STP effluent, outperforming ozonation alone and complementing biological treatment by targeting the non-biodegradable fraction. Studies by IAWQ (International Association on Water Quality) and regulatory bodies in Germany and the Netherlands, where pharmaceutical discharge limits are tightest, confirm GAC tertiary filtration achieves greater than 90 percent removal for most priority micropollutants.

Key fact: The European Water Framework Directive lists 17-alpha-ethinylestradiol and diclofenac as priority substances, with annual average limits as low as 0.035 nanograms per litre in some member states. Activated carbon tertiary treatment is the technology of choice for achieving these limits.

For Indian STPs discharging to rivers that supply downstream drinking water intakes, pharmaceutical and personal care product removal is increasingly relevant. India’s CPCB guidelines for Class B and C water bodies are becoming stricter, and STPs serving large cities with hospital wastewater contributions are under greater scrutiny. Western Carbon’s high-iodine-number GAC grades, available through the Westaqua range, provide the micropore capacity needed for trace organics adsorption.

7. Colour and Turbidity Polishing After Biological Treatment

Colour in secondary STP effluent arises from several sources: humic and fulvic acids from decomposed organic matter, coloured metabolites from biological treatment, residual dyes and pigments from industrial contributions, and melanoidins formed during food waste decomposition. Biological processes do not reliably remove colour, particularly from humic substances, which are resistant to microbial degradation.

Activated carbon adsorbs colour-causing compounds effectively due to their aromatic structure and high molecular weight, both of which favour adsorption over small pore surfaces. COD associated with colour compounds is simultaneously removed, contributing to overall effluent quality improvement. For STPs receiving dye-industry wastewater, PAC dosing into the secondary clarifier at 20 to 40 mg/L provides colour knockdown ahead of the biological stage, reducing colour load on the GAC tertiary filter.

Turbidity removal in GAC filters is secondary to adsorption but still significant. Physical straining of fine suspended solids within the carbon bed reduces effluent turbidity by 30 to 60 percent, supplementing secondary clarifier performance during wet weather events when hydraulic overloading causes secondary clarifier upsets. Regular backwashing of the GAC bed at 30 to 40 metres per hour prevents accumulated solids from causing channelling or pressure drop problems.

8. Carbon Bed Design for STP Applications

Correct carbon bed design determines both treatment performance and total cost of ownership. Undersized beds lead to premature breakthrough and frequent replacement; oversized beds carry unnecessary capital and media costs. STP carbon bed design requires several decisions informed by site-specific data.

Carbon Grade Selection

The iodine number of activated carbon indicates micropore capacity and suitability for small-molecule adsorption. For municipal STP tertiary treatment, an iodine number of 900 to 1100 mg/g is appropriate. Higher iodine numbers provide greater capacity for trace organics but may come at a cost premium. Acid-washed carbon is preferred where effluent pH is naturally acidic or where metals in the feed might otherwise cause scaling. Standard unwashed carbon is used where pH is neutral to slightly alkaline and water chemistry is stable.

EBCT and Bed Volume

Empty bed contact time is the fundamental design parameter. For municipal STP tertiary treatment targeting BOD below 5 mg/L and micropollutant removal, EBCT of 15 to 20 minutes is recommended. EBCT below 10 minutes may achieve adequate BOD removal but insufficient micropollutant adsorption. Bed depth is calculated from EBCT and hydraulic loading rate. A typical 15-minute EBCT at 10 m/hr loading corresponds to a bed depth of 2.5 metres.

Backwash Design

GAC beds accumulate biological growth and suspended solids during service. Periodic backwashing at 2 to 3 times the design service rate expands the bed by 20 to 30 percent and dislodges trapped solids without excessive carbon loss. Backwash frequency in STP tertiary filters is typically daily to weekly depending on solids loading from secondary effluent quality.

Design Parameter GAC Fixed Bed PAC Dosing
Typical application Continuous tertiary polishing Shock loads, seasonal peaks
Contact time 15 to 20 minutes EBCT 30 to 90 minutes contact
Dose / carbon volume 0.5 to 2 m3 carbon per m3/hr flow 10 to 40 mg/L per treatment cycle
Infrastructure Pressure vessel or open filter Dosing pump and mixing tank
Spent carbon handling Backwash + periodic bulk replacement Settled with sludge, dewatered
Regeneration potential Yes, thermal reactivation Generally single-use
Micropollutant removal Excellent (greater than 85%) Good at adequate dose (60 to 90%)

9. Spent Carbon Management and Regeneration in STP Systems

When GAC in an STP tertiary filter reaches capacity, the carbon must be removed and either reactivated for reuse or disposed of. The choice between regeneration and replacement depends on scale, infrastructure and economics.

Thermal Reactivation

Thermal reactivation at 850 to 950 degrees Celsius in a rotary kiln or multiple-hearth furnace drives off adsorbed organics and restores 90 to 95 percent of original capacity. Carbon losses during reactivation are 5 to 10 percent per cycle, requiring make-up carbon addition. For large STPs treating more than 50 MLD, the volume of spent carbon is sufficient to justify transport to a centralised reactivation facility. Western Carbon works with STP operators to coordinate bulk removal and replacement logistics.

Disposal of Spent Carbon from Municipal STP

Spent carbon from municipal STP tertiary filters is typically classified as non-hazardous waste, since the adsorbates are primarily biodegradable organics, pharmaceuticals and colour compounds rather than listed hazardous substances. Disposal in engineered landfill is permissible under CPCB and state PCB regulations for most municipal STP applications. Where the STP receives industrial effluent contributions containing heavy metals or persistent organic pollutants, spent carbon characterisation is advisable before disposal.

PAC in STP Sludge

PAC dosed into biological reactors mixes with the biomass and exits with waste activated sludge. PAC-laden sludge behaves similarly to conventional waste sludge in dewatering. The adsorbed organics undergo partial decomposition during anaerobic digestion, releasing capacity. PAC doses in municipal STP biological reactors at 10 to 20 mg/L do not significantly alter sludge volume index or dewatering characteristics at typical mixed liquor suspended solids concentrations.

10. Western Carbon Serves Customers Worldwide

Western Carbon and Chemicals supplies activated carbon for sewage treatment plants, effluent treatment facilities and water utilities across India and globally. Our certified products meet AWWA and BIS standards and are supported by technical documentation for STP commissioning and regulatory submissions.

Improve STP Effluent Quality with Activated Carbon

Western Carbon supplies GAC and PAC for tertiary polishing and odour control in sewage treatment plants across India. Meet regulatory discharge standards consistently.

Contact Our Technical Team

Also explore GAC for water treatment

12. Frequently Asked Questions

What is the main role of activated carbon in a sewage treatment plant?

Activated carbon serves two primary roles in sewage treatment plants: odour control by adsorbing hydrogen sulphide, mercaptans and ammonia from off-gas streams, and tertiary filtration by removing residual COD, micropollutants, colour and suspended solids from biologically treated effluent before discharge or reuse. For odour control, carbon beds are installed in ventilation ducts on enclosed STP structures. For tertiary treatment, granular activated carbon in fixed beds polishes secondary clarifier effluent.

Should I use GAC or PAC in a sewage treatment plant?

GAC is preferred for continuous tertiary polishing in fixed beds, offering efficient carbon use and straightforward regeneration. Powdered activated carbon is better for seasonal shock loads, emergency dosing or existing biological reactors where bed installation is not feasible. Many STPs use GAC for routine tertiary treatment and PAC for peak loading periods. The two approaches are complementary rather than competing.

What contaminants does activated carbon remove from sewage effluent?

Activated carbon removes residual BOD and COD, colour compounds, surfactants, pharmaceuticals, personal care products, endocrine-disrupting compounds, pesticide residues, chloramines and other dissolved organics that survive biological treatment. It also removes taste and odour compounds that would otherwise carry through to reuse applications. The broad adsorption spectrum of activated carbon makes it the preferred single-step polishing technology for complex municipal effluent.

How often does GAC need to be replaced in an STP tertiary filter?

GAC service life in STP tertiary filters typically ranges from 6 months to 2 years depending on influent quality, bed volume relative to flow, and contaminant loading. Carbon testing through iodine number and methylene blue number helps determine breakthrough and schedule replacement or reactivation. Regular effluent quality monitoring is the most practical field indicator. Contact Western Carbon for a service life estimate based on your STP’s secondary effluent quality.

Can activated carbon handle the odour from an STP?

Yes. Activated carbon in fixed-bed or packed-tower scrubbers effectively captures H2S at concentrations up to several hundred ppm, as well as mercaptans, ammonia and volatile organic compounds from STP off-gas. Impregnated carbon grades with potassium permanganate or alkali are used where ammonia levels are high. The Westdiox range from Western Carbon is specifically designed for acid gas and odour control applications in wastewater treatment.

What mesh size of activated carbon is best for STP tertiary filters?

Granular activated carbon in the 8×30 or 12×40 mesh range is most commonly used in STP pressure filters and gravity beds. Finer mesh increases pressure drop but improves contact efficiency. The choice depends on hydraulic loading rate, available head and backwash capacity. Western Carbon’s granular carbon mesh size guide provides detailed selection criteria for different filter configurations.

Does activated carbon remove micropollutants like pharmaceuticals from STP effluent?

Activated carbon is one of the most effective technologies for pharmaceutical and endocrine-disrupting compound removal from STP effluent, achieving 70 to 99 percent removal for most compounds. PAC doses of 10 to 20 mg/L in biological treatment or GAC tertiary beds with 15 to 20 minutes EBCT are common approaches. The Westaqua range of high-iodine-number carbons is optimised for trace organic and micropollutant applications.

How is spent carbon from an STP disposed of or regenerated?

Spent GAC from STPs can be thermally reactivated in rotary kilns at 850 to 950 degrees Celsius, restoring 90 to 95 percent of original capacity. For smaller installations or where reactivation is not viable, spent carbon is disposed of as non-hazardous solid waste, since STP effluent typically does not contain regulated hazardous substances. PAC settled with biological sludge is dewatered and disposed of with sludge cake. Western Carbon provides return-and-replace logistics for STP customers in its supply network.

External References:

  1. Central Pollution Control Board (CPCB), India. “Standards for Effluent Discharge from Sewage Treatment Plants.” CPCB Environmental Standards.
  2. Margot, J., et al. “Treatment of micropollutants in municipal wastewater: ozone or powdered activated carbon?” Science of the Total Environment, 461-462 (2013): 480-498.
  3. World Health Organization. “Pharmaceuticals in Drinking-Water.” WHO Press, Geneva, 2012.
  4. IAWQ Task Group. “Removal of micropollutants in wastewater treatment by activated carbon.” Water Research, 2015.
  5. American Water Works Association (AWWA). “Activated Carbon: Solutions for Improving Water Quality.” AWWA Manual M62, 2016.