Blog > Blogs

Activated Carbon in Edible Oil Refining: Bleaching, Colour and Contaminant Removal Stages

image
AI Icon Summarize this Article with AI

Key Highlights

  • Activated carbon is added to bleaching earth at 2 to 10 percent by weight to remove trace contaminants from crude vegetable oils during refining.
  • Powdered activated carbon reduces polycyclic aromatic hydrocarbons (PAHs), dioxins, pesticide residues and chlorophyll pigments that bleaching earth alone cannot adequately capture.
  • Food grade PAC must comply with FSSAI and Codex Alimentarius specifications including strict heavy metal limits and ash content requirements.
  • Bleaching is conducted at 90 to 120 degrees Celsius under vacuum with contact times of 20 to 30 minutes for maximum adsorption efficiency.
  • Western Carbon’s WestOilPure range is purpose-formulated for edible oil bleaching with certified food grade purity and low heavy metal content.
  • PAH removal rates exceeding 90 percent and dioxin reductions of 70 to 95 percent are achievable with correct activated carbon dosing in the bleaching stage.

Edible oil refining is a multi-stage industrial process that transforms crude pressed or solvent-extracted vegetable oils into the clear, stable, odour-neutral products found on supermarket shelves. Among the stages of refining, bleaching is the most critical for removing colour-causing pigments and trace chemical contaminants. Powdered activated carbon plays an increasingly important role at this stage, working alongside bleaching earth to deliver oil that meets modern food safety standards.

Regulatory bodies including FSSAI in India, the European Food Safety Authority and Codex Alimentarius have tightened limits on contaminants such as PAHs, dioxins and pesticide residues in edible oils. Standard bleaching earth is effective for pigment removal but insufficient for trace organic contaminants. Food grade activated carbon, added in small doses to the bleaching earth blend, provides the additional adsorptive capacity needed to meet these stricter requirements. This guide explains the science, specifications and practical application of activated carbon in edible oil refining.

1. Edible Oil Refining Process: Degumming, Neutralisation, Bleaching and Deodorisation

Crude vegetable oils extracted from seeds, nuts or fruits contain a range of impurities that make them unsuitable for direct consumption. The refining process removes these impurities through a sequence of physical and chemical treatments designed to produce oil that is clear, shelf-stable and safe.

The Four Core Refining Stages

Stage Process What It Removes Method
Degumming Water or acid treatment Phospholipids (gums), mucilaginous substances Water washing, enzymatic or acid degumming
Neutralisation Alkali refining or physical refining Free fatty acids, soaps, residual phospholipids NaOH treatment or steam stripping
Bleaching Adsorption with bleaching earth and activated carbon Colour pigments, trace metals, PAHs, pesticides, dioxins Contact adsorption under vacuum at 90 to 120 C
Deodorisation Steam distillation under vacuum Volatile off-flavours, remaining free fatty acids, tocopherols Steam injection at 220 to 270 C under high vacuum

The bleaching stage sits between neutralisation and deodorisation, and it performs dual functions: removing colour pigments that cause the oil to appear dark or yellow-green, and adsorbing trace organic contaminants that would otherwise survive into the final product. Both bleaching earth and activated carbon are deployed as adsorbents in this stage.

!

Physical refining, which skips the alkali neutralisation step and uses steam stripping for FFA removal, relies even more heavily on the bleaching stage for trace contaminant removal. This increases the importance of activated carbon in physical refining lines.

2. Role of Activated Carbon in the Bleaching Stage

Bleaching earth is the workhorse adsorbent of the bleaching stage. It is an acid-activated clay that provides a high surface area for adsorbing colour pigments including chlorophylls, carotenoids and their oxidation products. Bleaching earth is typically dosed at 0.5 to 3 percent by weight of oil depending on the crude oil quality and target colour specification.

However, bleaching earth has limitations. Its pore size distribution is dominated by mesopores and macropores, which are effective for large pigment molecules but less efficient at capturing small molecular weight trace contaminants such as PAHs (which include compounds like benzo[a]pyrene with molecular weight 252 g/mol) and pesticide residues. This is where powdered activated carbon provides critical complementary performance.

How Activated Carbon Complements Bleaching Earth

Activated carbon is characterised by an extensive micropore network with pore diameters below 2 nanometres. These micropores are precisely suited to adsorbing small organic molecules including PAHs, dioxins, furans, PCBs and certain pesticide molecules. When blended with bleaching earth at 2 to 10 percent of the bleaching earth dose, activated carbon dramatically improves the removal of these contaminants without materially affecting the oil’s colour or flavour profile.

The combined use of bleaching earth and activated carbon allows refiners to meet stringent food safety requirements including EU Regulation 835/2011 on PAHs in edible oils and FSSAI limits under the Food Safety and Standards (Contaminants, Toxins and Residues) Regulations.

3. Colour Removal from Crude Vegetable Oil Using Activated Carbon

Colour in crude vegetable oil arises from several classes of pigment compounds. Each presents different adsorption characteristics, and understanding them helps refiners optimise their bleaching earth and activated carbon blend.

Major Colour-Causing Pigments in Crude Oils

Chlorophylls are the dominant green pigment in many vegetable oils. Chlorophyll a and b have high molecular weights and are strongly adsorbed by bleaching earth. Activated carbon provides supplementary chlorophyll adsorption and is particularly useful when chlorophyll content is unusually high, such as in early-harvest rapeseed or olive pomace oils.

Carotenoids produce the characteristic yellow-orange colour of palm oil and similar oils. Beta-carotene, lycopene and xanthophylls are primarily removed by bleaching earth. Activated carbon contributes to reduction of oxidised carotenoids and secondary pigments.

Gossypol is a phenolic pigment found specifically in cottonseed oil. It is adsorbed efficiently by both bleaching earth and activated carbon. Activated carbon at higher doses (5 to 10 percent of bleaching earth weight) is sometimes used specifically to target gossypol removal in cottonseed refining.

Oxidation products including polymers, dimers and secondary oxidation compounds contribute to dark colour development during storage. Activated carbon is particularly effective at adsorbing these relatively small molecular weight oxidation products due to its dense micropore structure.

Key fact: Palm oil colour specifications under PORAM (Palm Oil Refiners Association of Malaysia) standards require refined bleached deodorised (RBD) palm oil to achieve a Lovibond colour of 3 red maximum (5 1/4 inch cell). Achieving this in palm oils with high initial colour burden often requires activated carbon supplementation during bleaching.

4. PAH and Mineral Oil Contaminant Removal

Polycyclic aromatic hydrocarbons represent one of the most critical contaminant challenges in edible oil refining. PAHs are formed by incomplete combustion of organic matter and enter the oil supply through multiple pathways: contaminated soil absorption by the growing plant, atmospheric deposition on exposed seeds during drying, and direct-fire drying of copra, groundnut or other oilseeds.

Regulatory Limits for PAHs in Edible Oils

Contaminant EU Regulation 835/2011 Limit FSSAI Limit (India) Activated Carbon Removal Efficiency
Benzo[a]pyrene (BaP) 2 micrograms/kg 10 micrograms/kg 90 to 97 percent reduction
Sum of PAH4 (BaP, BaA, Chr, BbF) 10 micrograms/kg Not individually specified 85 to 95 percent reduction
Mineral oil saturated hydrocarbons (MOSH) Guidance pending Not currently regulated 60 to 85 percent reduction
Mineral oil aromatic hydrocarbons (MOAH) Guidance pending Not currently regulated 80 to 92 percent reduction

Activated carbon’s effectiveness against PAHs stems from the strong pi-pi electron interactions between the graphitic carbon surface and the aromatic ring systems of PAH molecules. These non-polar, planar molecules fit precisely into the micropore channels of food grade powdered activated carbon, where they are held by van der Waals forces and aromatic stacking interactions.

!

Coconut shell-based activated carbon, which has a predominantly microporous structure, generally outperforms coal-based or wood-based carbons for PAH removal in edible oils. The micropore volume (typically 0.3 to 0.5 cc/g for coconut shell carbon) is the primary predictor of PAH adsorption capacity in oil matrices.

Mineral oil hydrocarbons, increasingly scrutinised by EU authorities under the EFSA mineral oil risk assessment framework, are also susceptible to activated carbon treatment. MOSH compounds with longer chain lengths are more readily adsorbed than short-chain compounds, while aromatic mineral oil fractions (MOAH) are generally better adsorbed due to their aromatic character.

5. Pesticide Residue and Dioxin Removal from Edible Oils

Pesticide residues from agricultural applications and persistent organic pollutants (POPs) including dioxins, furans and PCBs represent a growing regulatory challenge for edible oil refiners. Bleaching earth provides limited adsorption of these compounds due to their small molecular size and non-polar character. Activated carbon is the primary tool for their removal during refining.

Dioxin and PCB Removal Performance

Dioxins and polychlorobiphenyls enter the food chain through contaminated animal feed, industrial atmospheric deposition and soil contamination. Fish oil, animal fats and certain vegetable oils grown in contaminated regions can contain dioxin and PCB levels that exceed EU maximum limits (Commission Regulation EC 1881/2006). Activated carbon treatment at the bleaching stage is the most cost-effective remediation approach available to refiners.

Research published in the European Journal of Lipid Science and Technology demonstrates that adding 0.2 to 0.5 percent food grade PAC (by weight of oil) during bleaching achieves dioxin reductions of 70 to 95 percent, depending on initial contamination levels, carbon grade and contact conditions. This is sufficient to bring most mildly contaminated batches within EU regulatory limits without discarding the oil.

Food Grade Activated Carbon for Oil Refining

Western Carbon supplies WestOilPure food grade powdered activated carbon for edible oil bleaching applications. Meets FSSAI and Codex Alimentarius specifications with full batch certificates.

Explore WestOilPure

Pesticide Residue Adsorption

Organochlorine pesticides (OCPs) including aldrin, dieldrin, endrin, DDT and lindane are among the most problematic residues in edible oils from developing country agricultural systems. Activated carbon adsorbs these compounds effectively, with removal efficiencies typically in the range of 65 to 90 percent depending on the specific pesticide and operating conditions.

Organophosphate pesticides are more water-soluble and generally present at lower concentrations in oil due to their partitioning behaviour, but activated carbon supplementation during bleaching provides additional assurance of residue reduction. Western Carbon’s WestOilPure product range is validated for use in applications requiring FSSAI food additive compliance and comes with pesticide residue test data on the carbon itself to confirm it introduces no additional contamination.

6. Food Grade Activated Carbon: Purity Standards and Heavy Metal Limits

Not all activated carbon is suitable for use in edible oil refining. Carbon used in contact with food must comply with food additive regulations and meet strict purity specifications. Using technical or industrial grade carbon in food applications creates contamination risks and regulatory non-compliance.

Key Specifications for Food Grade PAC

Parameter Specification Limit Test Method Significance
Arsenic (As) Maximum 3 mg/kg ICP-MS or AAS Carcinogenic heavy metal; strict food limits
Lead (Pb) Maximum 10 mg/kg ICP-MS or AAS Neurotoxic; cumulative body burden risk
Mercury (Hg) Maximum 1 mg/kg Cold vapour AAS Neurotoxic; especially critical in fish oil applications
Cadmium (Cd) Maximum 2 mg/kg ICP-MS or AAS Nephrotoxic; strict food additive limits
Ash Content Maximum 6 percent (coconut shell) to 15 percent (coal) ASTM D2866 High ash indicates mineral impurities
Moisture Content Maximum 10 percent ASTM D2867 Excess moisture affects dosing accuracy
pH (water extract) 5.5 to 8.0 ASTM D3838 Extreme pH can affect oil quality
Total Extractables Regulated substance specific Solvent extraction methods Ensures carbon does not leach into oil

In India, food grade activated carbon is regulated as a food additive under FSSAI standards. The applicable INS number for activated carbon in food processing is INS 153. Suppliers must provide documentation of compliance including Certificate of Analysis (CoA) and, ideally, food safety management system certification.

!

Codex Alimentarius Standard for Food Grade Activated Carbon (JECFA specification) requires the carbon to be derived from suitable carbonaceous raw materials and activated by physical or chemical means. It sets criteria for identity and purity including water-soluble substances, acid-soluble ash, PAH content of the carbon itself and heavy metal limits.

Western Carbon maintains food safety certifications relevant to its WestOilPure product range. Buyers should request the full specification sheet, batch Certificate of Analysis and any applicable food safety certification before approving a food grade carbon supplier.

7. Powdered vs Granular Activated Carbon in Oil Bleaching

Both powdered and granular forms of activated carbon are commercially available, but their suitability for edible oil bleaching differs substantially. Understanding the distinction is important for plant engineers selecting adsorbents for a specific refining configuration.

Why PAC Dominates in Edible Oil Bleaching

Powdered activated carbon (PAC, typically 90 percent passing 150 microns or finer) dominates in edible oil bleaching for several reasons. First, it blends directly into the bleaching earth slurry or is metered into the oil stream before the bleaching vessel, integrating seamlessly into the existing process flow. Second, the fine particle size maximises mass transfer rates, ensuring rapid adsorption within the 20 to 30 minute contact time typical of batch bleaching vessels. Third, the spent PAC is removed along with spent bleaching earth in the existing pressure filter system, requiring no separate carbon handling equipment.

Granular activated carbon (GAC) is not commonly used in mainstream edible oil bleaching because it cannot be easily suspended in the oil-bleaching earth mixture and would require dedicated fixed-bed adsorption columns. However, GAC columns are occasionally used as a polishing step after the main bleaching stage in specialist applications requiring very low PAH levels or for treating highly contaminated crude oil batches. This approach requires separate filtration and carbon regeneration infrastructure.

Particle Size Considerations for PAC in Oil

For edible oil bleaching, PAC particle size affects both adsorption kinetics and filtration efficiency. Finer particles provide faster adsorption (shorter diffusion paths) but can increase filter press cycle times and filter cake resistance. Particle size distributions are typically specified as D90 of 50 to 150 microns for oil bleaching applications. The WestOilPure range is available in particle size grades optimised for different bleaching vessel configurations and filtration systems.

8. Dosing Rates and Contact Conditions for Edible Oil Bleaching

Correct dosing and operating conditions are essential for achieving target contaminant removal while controlling costs. Activated carbon is significantly more expensive than bleaching earth per kilogram, so over-dosing is a costly error. Under-dosing risks regulatory non-compliance.

Recommended Dosing Ranges

Application PAC Dose (% of oil weight) PAC as % of Bleaching Earth Dose Target Contaminant
Standard colour and pigment removal 0.02 to 0.05 percent 2 to 4 percent Chlorophyll, carotenoids, oxidation products
PAH reduction in flame-dried oils 0.1 to 0.3 percent 5 to 10 percent Benzo[a]pyrene, PAH4 sum
Dioxin and PCB remediation 0.2 to 0.5 percent 8 to 15 percent PCDD/F, dl-PCBs
Mineral oil hydrocarbon reduction 0.1 to 0.4 percent 5 to 12 percent MOSH and MOAH fractions
Pesticide residue reduction 0.05 to 0.2 percent 3 to 8 percent OCPs, organophosphates

Optimal Contact Conditions

Activated carbon adsorption in oil is governed by temperature, contact time, mixing intensity and vacuum conditions. Standard bleaching earth operating conditions provide a suitable environment for activated carbon adsorption:

  • Temperature: 90 to 120 degrees Celsius promotes diffusion of contaminant molecules into carbon micropores and reduces oil viscosity, improving mass transfer.
  • Vacuum: 50 to 100 mbar removes dissolved oxygen and water vapour, reducing oil oxidation during the contact period.
  • Contact time: 20 to 30 minutes is standard for batch bleaching. Extended contact improves removal efficiency but increases oxidation risk.
  • Agitation: Moderate stirring ensures uniform suspension of bleaching earth and activated carbon particles throughout the oil volume.

For continuous bleaching systems, the carbon-bleaching earth mixture is metered into the oil stream and passes through a residence vessel before filtration. Plug flow conditions with residence times of 15 to 25 minutes are typical.

9. Quality Testing for Food Grade Activated Carbon

Before approving any food grade activated carbon supplier, edible oil refiners should request and validate a comprehensive package of quality documentation. The following testing programme is recommended for incoming material qualification and ongoing batch monitoring.

Incoming Material Testing

Heavy metals panel: As, Pb, Hg, Cd and preferably also Cr, Ni and Zn by ICP-MS. This confirms food safety compliance and baseline contamination profile of the carbon raw material and production process.

Iodine number: ASTM D4607 test measures the carbon’s micropore volume indirectly via iodine adsorption from aqueous solution. For oil bleaching applications, an iodine number of 900 to 1200 mg/g is typical of coconut shell-based food grade carbons. Western Carbon provides iodine number certification for all WestOilPure batches.

Moisture and ash content: Both affect effective carbon dosing. High moisture means the stated dose contains less active carbon. High ash indicates mineral impurities that could affect oil quality.

PAH content of the carbon itself: Food grade carbon must not introduce additional PAH contamination. JECFA specifications limit the carbon’s own PAH content. This is particularly important for coal-based carbons, which can contain residual PAHs from the carbonisation process.

Particle size distribution: Laser diffraction or wet sieving to verify D10, D50 and D90 values meet specification for the target bleaching application.

Pilot Plant Validation

Before full-scale adoption of a new food grade carbon, bench-scale or pilot plant validation using representative crude oil samples is strongly recommended. Measure colour reduction, contaminant removal rates and filtration performance at the proposed dose. Compare results against the current approved carbon grade to confirm equivalence or improvement. Western Carbon’s technical team can assist with pilot plant trials and provide reference data from similar refining applications.

10. Western Carbon Serves Customers Worldwide

Western Carbon & Chemicals supplies WestOilPure food grade activated carbon and powdered activated carbon for edible oil refining to customers across Asia, the Middle East, Africa and beyond. Our product range covers food grade PAC in multiple particle size grades and iodine number specifications to suit diverse refining requirements.

Supply Your Oil Refinery with Food Grade Activated Carbon

Western Carbon’s WestOilPure range is specially formulated for edible oil bleaching. Low heavy metals, food safe, proven colour and contaminant removal performance. FSSAI and Codex Alimentarius compliant.

Request a Sample

Or learn more about WestOilPure food grade carbon

12. Frequently Asked Questions

What type of activated carbon is used in edible oil refining?

Powdered activated carbon (PAC) is predominantly used in edible oil refining. It is blended with bleaching earth at ratios of 2 to 10 percent by weight of bleaching earth. The PAC must meet food grade specifications including heavy metal limits, ash content and pH compliance under FSSAI and Codex Alimentarius standards. WestOilPure by Western Carbon is a range of food grade PAC specifically validated for edible oil applications.

How does activated carbon remove colour from vegetable oil?

Activated carbon removes colour-causing pigments including chlorophylls, carotenoids and oxidation products through adsorption. The large microporous surface area of food grade PAC physically traps these pigment molecules as the oil passes through the bleaching stage under heat and vacuum conditions. The process operates at 90 to 120 degrees Celsius under vacuum of 50 to 100 mbar with contact times of 20 to 30 minutes.

What is the difference between bleaching earth and activated carbon in oil refining?

Bleaching earth (acid-activated clay) is the primary adsorbent in edible oil bleaching and handles bulk pigment removal and phospholipid adsorption. Activated carbon is added as a co-adsorbent in smaller quantities to handle trace contaminants such as PAHs, dioxins, pesticide residues and polychlorobiphenyls that bleaching earth alone cannot adequately remove. The two adsorbents are complementary rather than alternatives.

What are PAHs and why must they be removed from edible oil?

Polycyclic aromatic hydrocarbons (PAHs) are carcinogenic compounds that enter crude oils through contaminated seeds, drying fires or industrial atmospheric deposition. The European Union sets limits of 2 micrograms/kg for benzo[a]pyrene and 10 micrograms/kg for the sum of PAH4 in edible oils. FSSAI sets its own maximum limits under Indian food safety regulations. Food grade activated carbon at 0.1 to 0.3 percent dosage can reduce PAH levels by over 90 percent during the bleaching stage.

What heavy metal limits apply to food grade activated carbon?

Food grade activated carbon must meet strict heavy metal limits. Typical specifications include arsenic below 3 mg/kg, lead below 10 mg/kg, mercury below 1 mg/kg and cadmium below 2 mg/kg. These limits align with Codex Alimentarius and FSSAI requirements for food additives. Western Carbon maintains certification documentation and batch Certificates of Analysis confirming WestOilPure meets these specifications.

At what temperature is activated carbon applied during edible oil bleaching?

Activated carbon and bleaching earth are typically mixed with oil at temperatures between 90 and 120 degrees Celsius under vacuum conditions of 50 to 100 mbar. Contact time ranges from 20 to 30 minutes in batch systems. These conditions promote maximum adsorption of pigments and contaminants while minimising oil oxidation. Continuous bleaching systems use shorter contact times of 15 to 25 minutes at similar temperatures.

Can activated carbon reduce dioxin and PCB contamination in edible oils?

Yes. Activated carbon is highly effective at adsorbing dioxins, furans and polychlorobiphenyls (PCBs) from edible oils. Research demonstrates that adding 0.2 to 0.5 percent food grade PAC during bleaching can reduce dioxin and PCB levels by 70 to 95 percent, bringing contaminated oils within EU regulatory limits. This makes activated carbon the primary remediation tool for dioxin-contaminated crude oil batches.

Which edible oils require activated carbon treatment?

Palm oil, sunflower oil, rapeseed oil, soybean oil and rice bran oil most commonly use activated carbon during refining due to their higher susceptibility to PAH, chlorophyll and contaminant loads. Fish oil and animal fats also benefit from activated carbon treatment to manage dioxin and PCB levels. The treatment is applied during the bleaching stage after degumming and neutralisation. Contact Western Carbon to discuss the specific requirements for your oil type and refining configuration.

External References:

  1. FSSAI. Food Safety and Standards (Contaminants, Toxins and Residues) Regulations. Food Safety and Standards Authority of India. www.fssai.gov.in
  2. Codex Alimentarius Commission. Codex Standard for Named Vegetable Oils (CXS 210-1999, amended 2023). FAO/WHO Food Standards Programme.
  3. European Commission. Commission Regulation (EC) No 1881/2006 Setting Maximum Levels for Certain Contaminants in Foodstuffs. Official Journal of the European Union.
  4. Agueda, V.I., et al. (2019). Removal of polycyclic aromatic hydrocarbons from vegetable oils during the bleaching process using activated carbon. European Journal of Lipid Science and Technology, 121(4).
  5. American Oil Chemists’ Society (AOCS). Official Method Cc 8c-02: Colour of Oils (Lovibond Method). AOCS Press, Urbana, Illinois.